
The firmware is designed to correct certain parodies.
Copy the attached file to the desktop on your computer.
From there copy the file to a cd. 
Make sure to copy as a data cd.
Make sure to finalize the disk. (no multi-session, no drag-to-disk, no DLA, don’t allow files to be added later)

After that is complete, put the cd in the reader (top drive)
On the menu, scroll down to 10. Utility, press ent.
Then scroll up, using the up arrow key until "Update Bios" is displayed.
Press ent, the duplicator should read the cd and update.
After the update is complete, you will be prompted to reboot.
Note: once the update is done, all default settings will be restored.
If you had adjusted some settings, you will need to reset them.

To adjust your settings.
Scroll to 11. Setup and press Ent.
Scroll to 9 Reader Speed, press  Ent.
Cd Speed will read 56x , scroll that to 40x, press Ent
Dvd Speed will read 18x/20x, scroll that to 12x, press Ent.
Press Esc twice then scroll to 7. Set burn speed and press Ent.
The first option will show Cd burn speed, 
Scroll up or down set this to 32x and press Ent.
The next option will show Audio burn speed, 
Scroll up or down to set that to 24x and press Ent. 
The next option will show dvd burn speed,
Scroll up or down to set that to 8x and press Ent
The next option will show DL burn speed,
Scroll up or down to set that to 4x and press Ent
Scroll back to 1.Copy. You should be set to go now.

