The firmware is designed to correct certain parodies.
Copy the attached file to the desktop on your computer.
From there copy the file to a cd. 
Make sure to copy as a data cd.
Make sure to finalize the disk. (no multisession, don’t allow files to be added later)

From there, place the cd in the reader. 
Push and hold Esc for 2 seconds.  
12. Adv Setup should appear along with 12-01 UnderRun Protect. 
If 12-01 UnderRun Protect does not appear, press Ent.  
Scroll down using the down arrow key to 12-07 Firmware Update.
Press ENT. 
On display it will show the current version installed in the controller,
and show the version on the disc. It will prompt "update,  yes?"
Push Ent to confirm. Once you push Ent, the unit will update. 
Once updated, all default settings will be restored. 
If you had previously adjusted any settings you will need to re-adjust your setting

Scroll down to 11. Setup. 
Press Ent, Then scroll up one time to 11-21 Audio Burn Speed, Press Ent.
Scroll down to 32x, press Ent.
Press Down two times until 11-02 Cd Burn Speed is displayed, press Ent.
Scroll down to 32x, press Ent.
Scroll down to 11-03 Dvd burn speed, press Ent.
Scroll down to 8x and press Ent.
Scroll down to 11-04 Read Speed, press Ent.
Scroll down to 32x and press Ent.
Scroll Up to 1. Copy and you should be all set.

Thanks.
